Fujifilm Étui en cuir pour X10

Excellent produit qui protège complètement l'appareil. Il permet également de bien le maintenir. La partie amovible est très appréciable. Le cuir est de bonne qualité. Produit à recommander si vous chercher de quoi protéger parfaitement votre X10 sans pour autant être trop encombrant.

Commenté en France 🇫🇷 le 21 avril 2013

Bel étui, protège efficacement. Cuir un peu trop brillant à mon goût. A noter: une sangle en cuir est livrée avec.

Commenté en France 🇫🇷 le 4 septembre 2013

La commande a été laborieuse devant le nombre de site qui propose ce produit, le choix a été parfait et cet étui donne une classe folle à l'appareil de photo. Le coté rétro m'a enchanté. C'est du cuir vrai solide.

Commenté en France 🇫🇷 le 29 mars 2013

Belles finitions mais pas d'accès direct au branchement sur un ordinateur, on est obligé d'enlever tout l’étui pour se faire... Mal pensé !

Utile

jenifer92

Bel étui en vrai cuir

Commenté en France 🇫🇷 le 1 mai 2013

Très belle qualité de cuir, s'adapte parfaitement à l'appareil photo fuji X10, donne un coté rétro du plus bel effet. Vendu avec une belle lanière en cuir

Etui d'origine d'excellente qualité

Une personne a trouvé cela utile

Utile

Philippe G

Commenté en France 🇫🇷 le 2 juillet 2013

Étui robuste et finition très soignée. Emballage Fuji d'origine. S'adapte parfaitement à l'appareil. La livraison fut rapide. Je suis très satisfait de cet achat.

Commenté en France 🇫🇷 le 14 février 2014

Superbe housse pour mon X20. Un côté vintage pour un produit pratique, élégant et qui protège vraiment bien mon X20.

Traduire tous les commentaires en français

Utile

Meilleurs commentaires provenant d’autres pays

Jorge A.

A premium case for a premium camera!

Commenté au Royaume-Uni 🇬🇧 le 5 janvier 2012

I have to admit that when I first saw how much money this case was, I had the doubt of buying it or not.
I did the right thing! I used a temporary cheap "camcorder" case while I waited this case to be delivered, and while the "camcorder" case was small and good, once I inserted my X10 on the Fujifilm case, they become one same thing in the same moment! You can take pictures easily with the camera in. If you are taking lots of pictures in the same place, you don't have to use the objective cap all the time, for this case has an excellent objective protection (does not replaces the objective cap, but prevents you from covering the objective so many times).
The only drawback this case has is that there is no compartment present where you can store memory cards, batteries etc. It will keep your X10, and that's it. But it is true that thanks to this, the case is so easy to carry.
I would definitely recommend this case, it's beautiful, well made, and it provides a really strong protection for your X10. (Also, it comes with a replacement leather strip, better than the one that comes packaged with the camera, and of better quality and strength.)

18 personnes ont trouvé cela utile

Ivan Strahan

Good case, great value

Commenté au Royaume-Uni 🇬🇧 le 21 janvier 2013

Firstly let me confess that I am no lover of ever-ready cases or, as I usually refer them "never-ready cases". My Leica M2 is a lovely camera to handle, but its case turns it into a deckchair. And the case for my Nikon F2 just about doubles its size. For these cameras I normally use a soft, wrap-around case.
With the Fuji X10, however, I need a more substantial case for those occasions when it lives in my briefcase and gets tossed around a bit. I read through all the reviews, having a good laugh at those dim-wits, who put the case on back to front and then complained that it didn't fit! After much hesitation, I ordered this Fuji case, specially after the price had been reduced to £39.99.
Initial impressions were favourable, as the case is as snug a fit as a Savile Row suit, adding only a little in size to the camera, so I was keen to try out the ergonomics. After a bout of field-testing, I can say that this is probably about the best hard case you are likely to get for any camera. Here are the plus points:
1) The case is extremely well made of high-grade leather.
2) The fit changes the camera handling very little. The moulded body grip is covered, but it is replaced by the edge of the leather case.
3) The flap opens "the wrong way round". Although this is counter-intuitive, you soon get used to it and it means that the flap never gets in the way of the lens. It is comfortable to use horizontally or vertically.
4) With the flap removed, you have a half-case to rival any of the expensive custom-made jobs.
5) The strap remains attached to the camera body, fastened to the case by loops, which are big enough to accommodate the fixtures of the best camera strap ever made - the Leica 14312.
While no camera handles as well in a hard case as without it, this is the best I have ever used in 50 years of photography. I still would prefer a soft, wrap case for normal carrying, but for those occasions when greater protection is required, this case is effective and great value at its new, reduced price.

3 personnes ont trouvé cela utile

Amazon Customer

Suitable for X10 AND X20

Commenté au Royaume-Uni 🇬🇧 le 19 avril 2013

This is a black leather "ever ready" case of the type which was routinely available for 35mm enthusiast cameras (SLRs and rangefinders) in the 1960s through to the 1980s. Some people love them, some hate them - I'm in the former camp. This type of case has made a bit of a resurgence recently with the fashion for more retro-styled cameras, such as the Fujifilm X10 and X20. The case is in two halves - a form-fitting lower half (often referred to as a "body jacket" these days) which can remain on the camera except when changing the battery or the memory card, or accessing the USB or HDMI jacks, and a top/front cover which is removable, but equally can be left hanging open whilst you use the camera. The inside of both halves is soft-lined so that it doesn't scratch the camera or its screen. There is also a matching leather strap supplied, which is slightly broader and has more rounded and finished edges than the one supplied with the camera. The leather used is quite firm, with useful creases in the top cover to help it fit more easily onto the camera when closing it. It doesn't have any padding as such, but is quite robust as the leather is both stiff and relatively thick, so it does give decent protection.

Three aspects of the case are worth describing, because not all every ready cases (ERCs) are designed the same way. Firstly, the bottom half secures to the camera via leather loops with press-studs which hook over the strap attachments on the camera - this is totally secure if the camera strap is fitted and quite easy to remove when required - but not very secure if you haven't fitted the strap. The other type of fastening routinely used on other ERCs is to screw into the tripod socket. I personally prefer the strap loop fitment as I always fit the strap, and it prevents any chance of over-tightening or cross-threading a tripod mount fitting screw, or scratching the camera baseplate, and also gives a flat base to the case (most but not all of the tripod screw types tend to have a very prominent knurled knob for the fastener which completely unbalances the case when it is set down - flat-based versions usually need a coin to fasten or unfasten them). The Fujifilm case is flat-based whether the front is closed or removed.

Secondly, the front fastens "back to front" - that is, you open it by undoing the centre front attachment point of the flap on the base, and flipping it up and over the camera backwards, so that the opened case front hangs down from the back of the camera, with the inside of the case's nose pointing towards you as you shoot. This may seem unusual as most such cases hang down from the front of the camera with the outside of the nose pointing towards you whilst open, but in fact this case's approach means it is far less likely to make an accidental appearance in your shots when you leave it attached whilst open. The case is attached to the body whilst open or closed by two press studs on the rear of the base, which are pretty strong but easy enough to unfasten intentionally and also to reattach (some designs can be quite hard to refasten). Being two points, the case front does not spin whilst open, which is good.

The third point is the other part of the closure. When opening and shutting the case front, the third attachment point at the front of the case base is used. Unusually, it is not a press stud but a concealed magnet. It has a reassuringly firm action and is inside the case material between the leather and the inner lining (on both halves) so it cannot scratch the camera. It is also well-shielded - although both halves are powerful, very little magnetism is detectable on the parts of the case where the camera is housed - most of the magnetic field is directed outwards. This design means you don't have to mess around trying to line up a balky, strong press stud fastening when reclosing the case.

Last point - this case, though marketed for the X10, is equally suitable for the new X20. The two cameras have an identical size and shape, and although this model (the LC-X10) has technically been superceded by the LC-X20, which Fujifilm markets as being suitable for both models, the only difference I am aware of is that the LC-X10 has an X10 logo embossed in the top centre of the front cover and at one end of the strap - I'm guessing that this has been changed to X20 (or something that would be suitable on either camera) on the new case, though I've yet to see one! Worth noting though, since the X10 case is currently considerably cheaper than the X20 one, and easier to find in stock. The X10 logo isn't painted in, just embossed, so it's pretty subtle.

8 personnes ont trouvé cela utile

bettabuilda

Great value item!

Commenté au Royaume-Uni 🇬🇧 le 7 février 2013

Ordered this with delivery through amazon prime, arrived as detailed. When I opened the package I was amazed to find that this was a genuine fuji accessory. The black fuji packaging matched the fuji X10 camera box perfectly. I assumed at the price that this would be a third party item with the "look" of the genuine article, not so, this is perfect for my camera and adds to the "retro" look and feel of the camera, fitting perfectly.It comes with a leather strap which I fitted to the camera replacing the fuji one supplied (I will keep this safely packed away for future use as needed). The case is independant of the camera so the strap is secure on the camera and will not fail you.The case can be used as a half case by releasing the press studs underneath. I have a UV filter fitted to the lens but I am confident that you could use the case as a substitute for the lens cap when shooting a lot as the camera feels very protected in the case. All in all I have no hesitation in recommending this case and it doesn't add to the bulk as it fits very closely to the camera body.

A

Luxury case!

Commenté au Royaume-Uni 🇬🇧 le 16 octobre 2012

I brought this case as part of a gift set for someone so I wanted to get the real deal. It's high quality leather and has a nice smell to it. The case fits the X10 very snuggly but can also fit with the lens cover on.

I'm a little disappointed it didn't have extra room at the back for a lens cloth, battery and SD Card and it could have had a mount point at the bottom, but these are just extra features.

The magnetic clasp has the right amount of power to hold itself together and release easily although the flap is quite bulky when flipped around.

The best thing about this case is the looks, which is why you'd pay more than say a canvas case with space for spares.